Product Details
2.62" Silver In-Dash Mount Trim Gauge (200767-33) by Auto Meter®. The "attitude" of a boat in the water can be controlled to a large extent by "trimming" the outdrive/propeller unit in relation to the stern of the boat. As the drive is trimmed up, the prop exerts more force downward, causing the bow to lift out of the water. As the drive is trimmed down, the force is exerted more in line with the boat hull, resulting in the bow riding lower in the water. Depending on a given trim angle, you can see increased or decreased speed, fuel economy, comfort and control at a given prop RPM. The trim gauge connects to a resistance based sender in the pivot of the outdrive. This functions much like the sender in a gas tank, with the gauge measuring resistance of the sender from totally down/in to totally up/out. This allows the operator to adjust for conditions and load quickly and easily.
Includes
- Gauge
- Bulb and socket assembly
- Red and green bulb covers
- Corrosion resistant mounting hardware
- Detailed instructions for installation
Features
- Features front sealed bezel design for added water resistance and UV protected paint on dial pointer for added protection against sun damage
- Works with 0 Ohm Down/90 Ohm Up trim level sending unit
- 12 and 16 volt compatible, well-suited with nearly every marine electrical system
- AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the boat
- Traditional incandescent lighting illuminates around the perimeter of the dial
Auto Meter® is the leading manufacturer of automotive instrumentation and electronics. The company manufacturers instruments for displaying everything that’s possible to measure on a vehicle, including specialized gauges, shift lights and warning lights for all types of racing, where they are the dominant brand. Founded in 1957 by electronic instrumentation pioneer Vern Westberg, today the company is a division of the Harbour Group. Besides manufacturing performance and racing instrumentation and electronics for the automotive aftermarket, Auto Meter also has an OEM division that makes instrumentation for production vehicles, a Pro-Cycle division that produces instrumentation for motorcycles, a Marine division that creates instrumentation for watercraft, and a Test Equipment division that manufactures a complete line of equipment for testing, charging and maintaining batteries, and testing the vehicle charging system. Headquartered in Sycamore, Illinois, where it has a 45,000 sq. ft. manufacturing plant, Auto Meter also has 125,000 sq. ft. of manufacturing plant space in Utah, where its OEM and Test Equipment divisions are located. The company has 500 employees, all devoted to providing the performance enthusiast and racer with the information they need.