Marine Autopilots
Featured Brands
-
NavPod®Pre-cut RailMount Pod (RMX4804)Pre-cut RailMount Pod (RMX4804) by NavPod®. For Garmin 5008/5208. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25"...Acrylic capped ABS plasticChromed stainless steel tamper-proof fasteners$591.05 - NavPod®Pre-cut RailMount Pod (RMX4811)Pre-cut RailMount Pod (RMX4811) by NavPod®. For Garmin 8008/8208. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25"...Acrylic capped ABS plasticChromed stainless steel tamper-proof fasteners$600.85
- NavPod®Pre-cut RailMount Pod (RMX4800)Pre-cut RailMount Pod (RMX4800) by NavPod®. For Garmin 92sv/93sv/94sv/95sv. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any...Acrylic capped ABS plasticChromed stainless steel tamper-proof fasteners$580.83
- NavPod®Pre-cut RailMount Pod (RMX4402)Pre-cut RailMount Pod (RMX4402) by NavPod®. For Raymarine e7/e7D. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25"...Acrylic capped ABS plasticChromed stainless steel tamper-proof fasteners$540.77
- NavPod®Pre-cut RailMount Pod (RMX4401)Pre-cut RailMount Pod (RMX4401) by NavPod®. For Garmin 7407/7407xsv/7607/7607xsv/720/721/740s/741/721xs/741xs/70s/70dv. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto...Acrylic capped ABS plasticChromed stainless steel tamper-proof fasteners$540.77
- NavPod®Pre-cut RailMount Pod (RMX4101)Pre-cut RailMount Pod by NavPod®. For 1 instrument. RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter...Acrylic capped ABS plasticChromed stainless steel tamper-proof fasteners$500.71
- NavPod®Pre-cut SailPod (GP1200-13)Pre-cut SailPod (GP1200-13) by NavPod®. For Garmin 1242xsv/1222xsv/1222 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2050-09)Pre-cut SailPod (GP2050-09) by NavPod®. For Garmin ECHOMAP 92sv/93sv/94sv/95sv For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2050-95)Pre-cut SailPod (GP2050-95) by NavPod®. For Raymarine gS95 Glass Bridge For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP1900-13)Pre-cut SailPod by NavPod®. For Simrad NSS9 evo²/B&G Zeus² 9 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$440.63
- NavPod®Pre-cut SailPod (GP2050-21)Pre-cut SailPod (GP2050-21) by NavPod®. For Simrad GO9/B&G Vulcan9, For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP1059)Pre-cut SailPod (GP1059) by NavPod®. For Simrad NSE8/B&G Zeus Z8 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2066)Pre-cut SailPod (GP2066) by NavPod®. For Furuno NavNet TZtouch² 12" (TZTL12F) Multi Touch MFD For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1213)Pre-cut SailPod (GP1213) by NavPod®. For Raymarine gS125 Glass Bridge 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1800-12)Pre-cut SailPod (GP1800-12) by NavPod®. For Garmin 820/820xs/840/840xs For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP2050-20)Pre-cut SailPod (GP2050-20) by NavPod®. For Garmin 7408/7408xsv/7608/7608xsv For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP1066)Pre-cut SailPod (GP1066) by NavPod®. For Furuno NavNet TZtouch² 12" (TZTL12F) Multi Touch MFD For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1900-06)Pre-cut SailPod (GP1900-06) by NavPod®. For Simrad NSS9 evo3/B&G Zeus3 9 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$440.63
- NavPod®Pre-cut SailPod (GP1800-13)Pre-cut SailPod (GP1800-13) by NavPod®. For Simrad GO9/B&G Vulcan9, For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP1200-12)Pre-cut SailPod (GP1200-12) by NavPod®. For Garmin 7412/7412xsv/7612/7612xsv 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1800-07)Pre-cut SailPod (GP1800-07) by NavPod®. For Raymarine Axiom 9 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP1900-09)Pre-cut SailPod (GP1900-09) by NavPod®. For Raymarine c95/c97/e95/e97 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$440.63
- NavPod®Pre-cut SailPod (GP2050-19)Pre-cut SailPod (GP2050-19) by NavPod®. For Garmin 7410/7410xsv/7610/7610xsv For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2050-98)Pre-cut SailPod (GP2050-98) by NavPod®. For Raymarine eS95/eS97/eS98 & Axiom PRO 9 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2053)Pre-cut SailPod (GP2053) by NavPod®. For Furuno MFD8 NavNet 3D For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2200-12)Pre-cut SailPod (GP2200-12) by NavPod®. For Garmin 7412/7412xsv/7612/7612xsv 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2205)Pre-cut SailPod (GP2205) by NavPod®. For Raymarine eS127/eS128 & Axiom PRO 12 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2035)Pre-cut SailPod (GP2035) by NavPod®. For Garmin 4012/4212 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods are...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2204)Pre-cut SailPod (GP2204) by NavPod®. For Raymarine a125/a127/a128 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1204)Pre-cut SailPod (GP1204) by NavPod®. For Raymarine a125/a127/a128 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
If you still have not equipped your boat with an autopilot and ask yourself a question if you should do it, the answer is Yes! Like no other navigation device, a properly chosen autopilot can keep your boat on a steady course, giving you a chance to do other important tasks, as well as decrease fuel consumption and minimize helm movements. As a result, you can enjoy a relaxed time afloat without affecting the steering precision.
Though there is a range of different autopilot systems created for various types of boats and featuring a number of basic and more advanced functions, the operation principle remains unchanged. An autopilot is a self-steering device that allows the vessel to hold a steady pre-set course. To cope with the task, the autopilot combines the work of three components: a heading sensor, also referred to as the fluxgate compass, a course computer, and a drive unit. The drive unit can be hydraulically or electrically powered and applies force to the rudder to adjust and maintain the course accurately.
Picking the right autopilot compatible with your boat’s specific parameters requires careful consideration. While boat design, its size and displacement are among the vitally important parameters that should be taken into account when choosing an autopilot system, special attention should always be given to the selection of a drive unit (steering ram). As the drive unit usually takes much space, it should be compatible with the size of your vessel and the type of steering system your boat uses. There are linear (for mechanically-steered boats), rotary (for cable and chain steering systems) and hydraulic (hydraulic steering systems) ram drives.
Another crucial factor is the speed of the autopilot determined by measuring the number of degrees per second of helm correction. The average autopilot speed ranges between 8° and 15° per second. You can also choose between the above-deck and below-deck units, perfectly suited for up to 40‘ sailboats and over 38‘ sailboats and powerboats respectively. However, irrespective of the type of autopilot system, additional consideration may be needed when positioning your control unit, which should preferably be located in a relatively dry place. Controllers may be basic or more sophisticated featuring GPS, sonar, available with a touch-screen display, etc.