Product Details
Heat/Smoke Detector by Maretron®. The Orbis Marine Optical /Heat Multisensor Detector is recognised as a good detector for general use but is additionally more sensitive to fast burning, flaming fires - including liquid fires - than optical detectors. They can be readily used instead of optical detectors but should be used as the detector of choice for areas where the fire risk is likely to include heat at an early stage in the development of the fire. The Multisensor detector has two sensors, one for smoke and one for heat with the alarm decision derived from either sensor or combination of both
Specifications
Detection principle Smoke: Photo-electric detection of light scattered by smoke particles |
Heat: Temperature-dependent resistances. |
Sampling frequency: Once every four seconds |
Operating voltage: 8.5 V dc to 33 V dc |
Supply Wiring: Two wire supply, polarity sensitive |
Maximum polarity reversal: 200 ms |
Power up time: < 20 seconds |
Minimum ‘detector active’ voltage: 6 V |
Power-up surge current at 24 V: 95 μA |
Average quiescent current at 24 V: 95 μA |
Alarm current 12 V/24V: 20 mA/40 mA |
Alarm load: 600 Ω |
Holding voltage: 5 V - 33 V |
Minimum holding current: 8 mA |
Minimum voltage to light alarm LED: 5 V |
Alarm reset voltage: < 1 V |
Alarm reset time: One second |
Alarm indicator Integral indicator with 360º visibility |
Operating and storage temperature: -40ºC to +70ºC |
Humidity (no condensation or icing): 0% to 98% RH |
Effect of atmospheric pressure on optical sensor: None |
Effect of wind speed: None |
IP Rating designed to IP23D |
Standards & approvals: EN54-5, EN54-7, MED, LR, BV, ABS and CCS |
Dimensions: 97 mm diameter x 31 mm height. 100 mm diameter x 46 mm height in base |
Weight: 75 g detector, 135 g detector with base |
Housing: White flame-retardant polycarbonate |
Terminals: Nickel plated stainless steel |
Features
- Responds well to fast-burning, flaming fires
- Transient rejection algorithms reduce false alarms
- Automatic drift compensation with DirtAlert™, a yellow flashing LED, to easily identify dirty detectors
- Red flashing LED at start up confirms the device is operating
- SensAlert™, yellow flashing LED indicates faulty operation
- FasTest™ takes just four seconds to test and confirm detectors are functioning correctly
When it comes to safety on the board, nothing can beat Maretron®! Committed to making every journey a safe and secure experience, Maretron sets world-class standards in vessel monitoring and control systems. The company combines leading-edge technology, superior engineering and maximum accuracy to create state-of-the-art marine electronics that’s among the best worldwide. From gateways, fuel flow monitors, electrical monitoring and control products to navigation instruments and various cables and connectors, Maretron has you covered with everything you need for simpler, safer and more secure boating. Built with quality and reliability at their core and rigorously tested, top of the line Maretron products withstand the harshest marine conditions. Get the highest level of safety while on the water with Maretron products!