Marine Multifunction Displays & Combos
Featured Brands
-
NavPod®Pre-cut SailPod (GP1059)Pre-cut SailPod (GP1059) by NavPod®. For Simrad NSE8/B&G Zeus Z8 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64 - NavPod®Pre-cut SailPod (GP2066)Pre-cut SailPod (GP2066) by NavPod®. For Furuno NavNet TZtouch² 12" (TZTL12F) Multi Touch MFD For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1213)Pre-cut SailPod (GP1213) by NavPod®. For Raymarine gS125 Glass Bridge 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1800-12)Pre-cut SailPod (GP1800-12) by NavPod®. For Garmin 820/820xs/840/840xs For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP2050-20)Pre-cut SailPod (GP2050-20) by NavPod®. For Garmin 7408/7408xsv/7608/7608xsv For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP1066)Pre-cut SailPod (GP1066) by NavPod®. For Furuno NavNet TZtouch² 12" (TZTL12F) Multi Touch MFD For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1900-06)Pre-cut SailPod (GP1900-06) by NavPod®. For Simrad NSS9 evo3/B&G Zeus3 9 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$440.63
- NavPod®Pre-cut SailPod (GP1800-13)Pre-cut SailPod (GP1800-13) by NavPod®. For Simrad GO9/B&G Vulcan9, For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP1200-12)Pre-cut SailPod (GP1200-12) by NavPod®. For Garmin 7412/7412xsv/7612/7612xsv 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1800-07)Pre-cut SailPod (GP1800-07) by NavPod®. For Raymarine Axiom 9 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP1900-09)Pre-cut SailPod (GP1900-09) by NavPod®. For Raymarine c95/c97/e95/e97 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$440.63
- NavPod®Pre-cut SailPod (GP2050-19)Pre-cut SailPod (GP2050-19) by NavPod®. For Garmin 7410/7410xsv/7610/7610xsv For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2050-98)Pre-cut SailPod (GP2050-98) by NavPod®. For Raymarine eS95/eS97/eS98 & Axiom PRO 9 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2053)Pre-cut SailPod (GP2053) by NavPod®. For Furuno MFD8 NavNet 3D For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2200-12)Pre-cut SailPod (GP2200-12) by NavPod®. For Garmin 7412/7412xsv/7612/7612xsv 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it"....The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2205)Pre-cut SailPod (GP2205) by NavPod®. For Raymarine eS127/eS128 & Axiom PRO 12 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2035)Pre-cut SailPod (GP2035) by NavPod®. For Garmin 4012/4212 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods are...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2204)Pre-cut SailPod (GP2204) by NavPod®. For Raymarine a125/a127/a128 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1204)Pre-cut SailPod (GP1204) by NavPod®. For Raymarine a125/a127/a128 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1205)Pre-cut SailPod (GP1205) by NavPod®. For Raymarine eS127/eS128 & Axiom PRO 12 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2036)Pre-cut SailPod (GP2036) by NavPod®. For Furuno NavNet TZtouch 14.1" Multi Touch For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1900-01)Pre-cut SailPod (GP1900-01) by NavPod®. For Raymarine eS95/eS97/eS98 & Axiom PRO 9 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$440.63
- NavPod®Pre-cut SailPod (GP1035)Pre-cut SailPod (GP1035) by NavPod®. For Garmin 4012/4212 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods are...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP1814)Pre-cut SailPod (GP1814) by NavPod®. For Raymarine a95/a97/a98 For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP1050-19)Pre-cut SailPod (GP1050-19) by NavPod®. For Garmin 7410/7410xsv/7610/7610xsv For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP1800-20)Pre-cut SailPod (GP1800-20) by NavPod®. For Garmin 7408/7408xsv/7608/7608xsv For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP1818)Pre-cut SailPod (GP1818) by NavPod®. For Furuno GP-1870/GP-1870F For 9.5" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$430.61
- NavPod®Pre-cut SailPod (GP2037)Pre-cut SailPod (GP2037) by NavPod®. For Furuno GP1920C/NT/1833C/1933C/1943C/GP1900C For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
- NavPod®Pre-cut SailPod (GP2050-10)Pre-cut SailPod (GP2050-10) by NavPod®. For Simrad NSE8/B&G Zeus Z8 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$450.64
- NavPod®Pre-cut SailPod (GP2065)Pre-cut SailPod (GP2065) by NavPod®. For Garmin 8012/8212 For 12" wide guard. SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. “Where you need it…when you need it". Sail Pods are...The Hi-Gloss Material: NavPods are manufactured with a custom co-extruded acrylic capped ABS material. NavPod uses the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidityThe Waterproof Seal: All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPod is made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics$500.71
From the entire range of technologically advanced electronics your boat can be equipped with, multifunction displays and combos are among the most important devices every boater should own. Easy to read, high-resolution displays with myriads of features will be the hub of your onboard network. Your eyes and ears when you are off-shore, multifunction displays combine a radar, sonar, cartography, wireless connectivity and internet browsing.
Multifunction displays and combos are created to make your boating experience more pleasant and less stressful by making complex devices easy to use and interpret. Instead of reading a number of monitors responsible for separate devices, multifunction displays allow you to simultaneously control the data received from your radar and GPS and monitor different performance parameters of your boat all from one display! Multiple displays can be connected together to create a comprehensive network of your marine electronics. Commonly used types of networks include NMEA 0183, NMEA 2000, CAN Bus and Ethernet-based networks.
As for the diagonal size of the display, it may range from modest 4 to 6 inches units to large 12+ inch monitors. Color and Grayscale configurations can be had. Apart from that, customers may choose from units with different resolution, usually categorized into low, medium and high resolution displays, the most advanced monitors boasting 1280 x 800 resolution. As for additional features, both multifunction displays and combos typically feature an inbuilt GPS antenna, some may also have a transducer and a pre-loaded cartography included. For additional ease of use and installation, we also offer a variety of display mounts.
The choice of multifunction displays and combos available on the market nowadays is truly immense. For instance, Simrad displays are designed for larger powerboats, sail/fishing boats, while B&G and Raymarine brands are oriented at sailboats only. Otherwise, you can search for the right multifunction display and combos based on a number of different parameters, including display type, color, size, features it offers, its resolution and much more. A large amount of multifunction screens available around are LCD and LED single touch screens, while multi-touch screen units, functioning like a smartphone are also available.