Product Details
Vector Pro G2 Surface/Pole Mount Compass by SI-TEX®. Experience superior navigation from the accurate heading and positioning performance available with the Vector Pro G2 Series GPS Compass. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver great quality at an affordable cost.
Specifications
| Receiver Type: Twin Receivers w/ L1, C/A code, with carrier phase smoothing |
| Channels: Two 12-channel, parallel tracking, (Two 10-channel when tracking WAAS |
| Update Rate: Standard 20 Hz Adjustable (position and heading) |
| Heading Accuracy: < 0.3º rms |
| Pitch / Roll Accuracy: < 1º rms |
| Rate of Turn: 90º/s max |
| Start up Time: < 60s typical |
| Heading Fix: < 20s |
| Satellite Reacquisition: < 1s |
| Frequency Range: 283.5 to 325 kHz |
| Operating Modes: Automatic (signal strength or range) and manual |
| Compliance: IEC 611 08-4 beacon standard |
| Serial ports: 2 full duplex RS-232 and 2 half-duplex RS-422 |
| Baud Rates: 4800-57600 |
| Correction I/O Protocol: RTCM SC-1 04 |
| Data I/O Protocol: NMEA 0 183 |
| Operating Temperature: -30°C to +70°C (-22°F to +158°F) |
| Storage Temperature: -40°C to +85°C (-40°F to +185°F) |
| Humidity: 100% non-condensing |
| EMC: FCC Part 15, Subpart B, Class B |
| Input Voltage: 9 to 36 VDC |
| Power Consumption: <5 w |
| Current Consumption: <360 mA@12 VDC |
| Reverse Polarity Protection: Yes |
| Dimensions (not including mounts): 60 cm L x 16 cm W x 18 cm H (23.6" L x 6.3"W x 7.1" H) |
| Weight: 1.5 kg (3.3 lb) |
| Power/Data Connector: 18-pin, Environmentally sealed |
| Gyro: Single axis gyro provides <1º heading for periods up to 3 minutes when loss of GPS lock has occurred |
| Tilt Sensor: Assists in fast start up of RTK |
Features
- The rugged enclosure combines GPS’ Crescent Vector board and two multipath-resistant antennas for simple installation
- The half-meter length smart antenna mounts easily to a flat surface or pole
- The stability and maintenance-free design of the Vector Pro replaces traditional gyrocompasses at a fraction of the cost
- IMO Wheelmarked for Commercial applications
Whether it’s for a hard-working commercial boat, sportfishing yacht, inshore skiff, power cruiser or sailing vessel, SI-TEX® offers a variety of proven products for the job. SI-TEX offers a full line of electronics to meet the demands of today’s boater - including professional-grade radar systems, high-performance echosounders, MFD chartplotter/sounder/radars, precision GPS navigation systems, heading sensors, autopilots, VHF communications and more.